DRAIN INSPECTION & LOCATION

DRAIN PIPE, LOCATOR WITH TRANSMITTER


	Image for reference only Actual item may look different Click on image for larger view

Manufacturer: GENERAL

Daily: $100.00

Weekly: $300.00

Quantity: for a period of
day(s) week(s)

Info

LINE LOCATOR AND TRANSMITTER
FOR LOCATING ELECTRIC LINE THAT DOES NOT HAVE POWER TO IT
1. REMOVE TRANSMITTER, GROUND ROD AND LEADS FROM BAG.
2. CONNECT LEADS TO TRANSMITTER
3. PUSH GROUND ROD INTO GROUND FIRMLY
4. CONNECT NEGATIVE LEAD (BLACK) TO GROUND ROD
5. CONNECT POSITIVE LEAD (RED) TO WIRE THAT YOU INTEND TO LOCATE
6. TURN ON TRANSMITTER USING THE POWER BUTTON
7. MAKE SURE TRANSMITTER IS SET TO 8.01K.
8. TURN ON LOCATOR AND MAKE SURE IT IS ALSO SET TO 8.01K
9. REDUCE GAIN SETTING AS NEEDED IN ORDER TO PIN POINT THE
LOCATION OF LINE
10. IF LINE IS BURIED AT DEEPER DEPTHS A HIGHER FREQUENCY MAY BE USED, EXAMPLE 32.8k ECT.
11. MAKE SURE THAT IF HIGH FREQUENCY IF USED THAT BOTH THE LOCATOR AND TRANSMITTER ARE SET THE SAME.
12. IF NEEDED REFERENCE THE OPERATOR S MANUAL
LOCATING POWERED ELECTRIC LINE
1. THE TRANSMITTER WILL NOT BE NEEDED FOR THIS OPERATION
2. LOCATOR WILL NEED TO BE SET TO EITHER (50Hz) or (60Hz) IN ORDER TO LOCATE 110 OR 220 HOT ELECTRICAL LINE
3. IF NEEDED, REFERENCE OPERATOR S MANUAL IN BAG

* Prices are subject to change.

* Please call us with any questions about our drain pipe locator with transmitter in Paris, serving Jackson, Clarksville, Murray, Memphis, Nashville, and Paducah KY.